|
SPECIFICATIONS
|
CMX300V | CMX500V | CMX800V | CMX2000V |
|---|---|---|---|---|
| STEREO MODE (Both Channels Driven) | ||||
| 8 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.1% THD |
185 W 200 W |
260 W 300 W |
450 W 500 W |
1050 W 1100 W |
| 4 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.5% THD |
280 W 300 W |
400 W 500 W |
650 W 800 W |
1600 W 2000 W (1% THD) |
| 2 ohms EIA 1 kHz, 1% THD |
430 W |
700 W |
1200 W |
2500 W |
| 70V Direct Drive EIA 1 kHz , 1% THD |
- |
- |
400 W |
2500 W |
| 100V Direct Drive EIA 1 kHz , 1% THD |
- |
- |
- |
1000 W |
| BRIDGE MONO MODE | ||||
| 8 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.1% THD |
530 W 600 W |
800 W 900 W |
1300 W 1500 W |
3200 W 3600 W |
| 4 ohms EIA 1 kHz, 1% THD |
830 W |
1400 W |
2400 W |
5000 W |
| 70V Direct Drive EIA 1 kHz , 1% THD |
600 W |
1200 W |
2000 W |
5000 W |
| 100V Direct Drive EIA 1 kHz , 1% THD |
- |
600 W |
2300 W |
3600 W |
| Signal to Noise, 20 Hz-20 kHz, 8 ohms | > -100 dB | > -100 dB | > -100 dB | > -100 dB |
| Input Sensitivity @ 8 ohms | 1.15V (+3.4 dBu) | 1.15V (+3.4 dBu) | 1.23V (+4.0 dBu) | 1.42V (+5.3 dBu) |
| Voltage Gain @ 8 ohms | 31.6x (30 dB) | 40x (32 dB) | 46x (33 dB) | 64x (36 dB) |
| Output Circuitry | Class AB | Class AB | 2-tier Class H | 3-tier Class H |
| Power Requirements (120V) 1/8 power pink noise at 4 ohms 1/3 power pink noise at 4 ohms |
4.4A 6.6A |
5.4A 9.6A |
6.3A 15.6A |
13.9A 26.9A |
| Power Requirements (230V) 1/8 power pink noise at 4 ohms 1/3 power pink noise at 4 ohms |
2.2A 3.3A |
2.7A 4.8A |
3.2A 7.8A |
7A 13.5A |
| Distortion (SMPTE-IM) | < 0.02% | < 0.01% | < 0.01% | < 0.01% |
| ALL MODELS | ||||
| Distortion
(Typical) 20 Hz - 20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
Less than 0.03% THD, 4 and 8 ohms Less than 0.03% THD, 4 and 8 ohms |
|||
| Damping Factor, 1 kHz and below | Greater than 300 at 8 ohms | |||
| Input Impedance | 10k ohms unbalanced, 20k ohms balanced | |||
| Input Clipping | 10 Vrms (+22 dB) | |||
| Cooling | Continuously variable-speed fan, rear-to-front air flow | |||
| Connectors, each channel | Input: Active balanced; barrier strip, XLR and
1/4" (6.3mm) TRS tip and XLR (pin 2 positive) Output: detachable terminal block and Neutrik™ Speakon™ |
|||
| Controls | Front: AC switch, Ch. 1 and Ch. 2 gain knobs Rear: 10-position DIP switch |
|||
| Indicators | Power-On: Green LED Signal: Green LED (1 per channel) Clip: Red LED (1 per channel) |
|||
| Amplifier Protection | Stable into reactive or mismatched loads | |||
| Load Protection | On/off muting, AC coupling (CMX300V, CMX500V), triac crowbar (CMX800V, CMX2000V, on each channel) | |||
| Power Requirements | 120, 230 VAC, 50-60 Hz | |||
|
Dimensions (HWD) 2RU Models 3RU Model (CMX2000V) |
3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears |
|||
| Weight - net | 35 lbs (15.9 kg) | 40 lbs (18.2 kg) | 44.5 lbs (20.2 kg) | 75 lbs (33.1 kg) |
| Weight - Shipping | 41 lbs (18.6 kg) | 46 lbs (20.9 kg) | 50.5 lbs (23 kg) | 87 lbs (37.2 kg) |