|
|
|
SPECIFICATIONS |
CX302 |
CX502 |
CX702 |
CX902 |
CX1102 |
CX302V |
CX602V |
CX1202V |
|
|
STEREO MODE, Both Channels Driven |
|
8 ohms, 20
Hz-20 kHz, 0.05% THD |
200 W |
300 W |
425 W |
550 W |
700 W |
-
|
550 W |
700 W |
|
4 ohms, 20
Hz-20 kHz, 0.05% THD |
325 W |
500 W |
700 W |
900 W |
1100 W |
-
|
-
|
1100 W |
|
2 ohms, 1
kHz, 1% THD |
600 W |
800 W |
1200 W |
1500 W |
1700 W |
-
|
-
|
-
|
|
70V, 20 Hz-20 kHz, 0.05% THD |
400 W
(with IT-42*) |
- |
- |
400 W |
800 W |
200 W |
400 W |
800 W |
|
70V, 1 kHz, 0.05% THD |
- |
- |
- |
440 W
|
1000 W
|
250 W
|
440 W
|
1000 W
|
|
70V, 1 kHz, 1% THD |
- |
- |
- |
600 W
|
1200 W
|
300 W
|
600 W
|
1200 W
|
|
|
BRIDGED MONO MODE |
|
16 ohms,
20 Hz-20 kHz, 0.1% THD |
400 W |
600 W |
850 W |
1100 W |
1400 W |
- |
1100 W |
1400 W |
|
8 ohms, 20
Hz-20 kHz, 0.1% THD |
700 W |
1100 W |
1500 W |
2000 W |
2200 W |
- |
- |
2200 W |
|
4 ohms, 1
kHz, 1% THD |
1200 W |
1600 W |
2400 W |
3000 W |
3400 W |
- |
- |
- |
|
140V, 20
Hz-20 kHz, 0.05% THD |
- |
- |
- |
800 W |
1600 W |
400 W |
800 W |
1600 W |
|
140V, 1
kHz, 0.05% THD |
- |
- |
- |
880 W |
2000 W |
500 W |
880 W |
2000 W |
|
140V, 1
kHz, 1% THD |
- |
- |
- |
1200 W |
2400 W |
600 W |
1200 W |
2400 W |
|
Noise, 20
Hz-20 kHz |
>-107 dB |
>-107 dB |
>-106 dB |
>-106 dB |
>-106 dB |
>-106 dB |
>-106 dB |
>-106 dB |
|
Input
Sensitivity @ 8 ohms |
1.26 Vrms
|
1.23 Vrms |
1.16 Vrms |
1.17 Vrms |
1.35 Vrms |
1.26 Vrms |
1.26 Vrms |
1.26 Vrms |
Voltage
Gain @ 8 ohms
|
30 dB |
32 dB |
34 dB |
35 dB |
35 dB |
35 dB |
35 dB |
35 dB |
|
Output
Circuitry |
AB+B |
AB+B |
H, 2-tier |
H, 2-tier |
H, 2-tier |
AB+B |
AB+B |
H, 2-tier |
|
|
ALL MODELS |
|
Distortion
(SMPTE-IM) |
Less than 0.02% |
Distortion
(Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power |
Less than 0.01% THD
Less than 0.01% THD |
|
Frequency
Response |
20 Hz-20 kHz, +/- 0.2 dB |
|
Damping
Factor |
Greater than 500
|
|
Input
Impedance |
6k ohms unbalanced, 12k ohms balanced
|
|
Input
Clipping |
10 Vrms (+22 dB)
|
|
Cooling |
Variable-speed fan, rear-to-front air flow
|
Connectors, each channel
|
Input: 3-pin XLR & 3-pin detachable terminal blocks
(1 each per channel)
Output: Safety-shrouded barrier strip
|
|
Amplifier Protection |
Full short circuit, open circuit, thermal,
ultrasonic, and RF protection.
Stable into reactive or mismatched loads.
|
|
Load
Protection |
On/Off muting, DC-fault power supply shutdown
|
Dimensions
|
19" (48.3 cm) wide, 3.5" (8.9 cm) tall (2 RU),
14" (35.6 cm) deep (from front mounting rails)
|
|
Weight |
21 lbs (9.5 kg) net
27 lbs (12.3 kg) shipping
|
* An isolation transformer (the
IT-42)
is available for the CX302, which converts its
low-impedance outputs to
isolated 400 W per channel
constant-voltage outputs. |
|